Scheme Of The Circuit 60 Watt Power Amplifier

Scheme Of The Circuit 60 Watt Power Amplifier | Your users should provide duty vehicles heatsink rate of 1.4 C / W. MUTE input pin 10 and pin 9 provides STANDBY mode. Always Deadly occur at the stand must be selected. Connecting pin Permanently husband to the supply rails (insert link) ensure that the New Articles Coming Soon on a power amplifier. Improve julian-constants C6-C5 R3 and R4 may eliminate switch-ON clicks. IC has internal thermal protection The cause mute to cut in and in 145 C ON switch to the standby amplifier heatsink 150 C. Do not operate without the module. Tab heatsink IN IC TDA7294 Internally connected to negative supply rail. If the module already installed in grounded metal enclosures Kesawan The IC must be isolated from the heatsink. If not regular, the negative supply rail will be shorted to the Land.

Schematic Circuit :

Parts List for Power Amplifier
R1=180ohm	C5-6=10uF 63V Electrolytic	J2=3pin connector
R2-3-5=10Kohm	C7=22uF 63V Electrolytic	J3=2pin connector
R4=22Kohm	C8=33uF 25V Electrolytic
R6=680ohm	C9-10=1000uF 63V Electrolytic	All Resistors is 1/4W 1%
C1=1.5uF 63V MKT Polyester	IC1=TDA7294 on Heatsink	All Electrolytic Capacitors is Axial
C2=2.7nF 63V MKT Polyester	J1=2pin connector with 2.54mm step
C3-4=100nF 100V MKT Polyester	JP1-2=2pin Jumper with 2.54mm step

Related Post:

Electronic Circuits

• The Sircuit Scheme Led Blinking
• Creating a Symmetrical Power Supply from a Single Voltage Source
• Headphone Amplifier Circuit With TDA 2004
• Fire Alarm Detector circuit
• Microphone Amplifier Circuit / Preamp Mic
• The Circuit Scheme Electronics Speaker Protector
• Creating Charger from USB Port Computer
• Electronics Scheme Using LED Voltmeter for Car Battery
• Free Applications To Make Electronic Schematic Diagram (EZ.Schematics.v4.0.1)